Many people believe that electronic radiators look the same, with no significant difference, let alone their classification. Today we will popularize some knowledge about electronic heat sinks and first understand the common classifications of electronic heat sinks.
In recent years, with the continuous development of household heat metering technology, the horizontal household heating system has also been widely used in civil and industrial buildings. It is also the most commonly used indoor heating layout in design. Electronic radiators are mainly divided into three types based on material types: iron radiators, aluminum radiators, and steel radiators.
1. Cast iron radiator
Cast iron radiators will gradually be phased out by the market due to their low pressure, large volume, rough appearance, high production energy consumption, and many insurmountable disadvantages.
2. Steel radiator
At present, steel radiators are mainly divided into two types by style: plate type and column type. Especially the steel column radiator, which is a steel column radiator, has won the love of many consumers with its rich colors and beautiful appearance.
When purchasing steel radiators, it is necessary to check whether they match the heating system of the residential area. Consumers using the open heating system should be careful to choose steel radiators, because steel radiators are prone to oxidation and corrosion in the presence of oxygen. There are strict requirements for the oxygen content in the open boiler and water. Both of them need to be maintained after the heating clothes are filled with water in the main system. If the maintenance is not good, the radiators will quickly repair the corrosion, resulting in water leakage of the radiators.
3. Aluminum radiator
There are two main types of aluminum radiators: high-pressure cast aluminum and stretched aluminum alloy welding. Its advantages mainly include:
① Aluminum has good heat dissipation and obvious energy-saving characteristics. In the same room, if radiator of the same specification are used, the number of pieces cast by aluminum is less than that of steel.
② Aluminum has good oxidation and corrosion resistance without the need for any additives. Its principle is that once aluminum encounters oxygen in the air, it forms a layer of oxide film, which is both tough and dense, preventing further corrosion of the body material.
Choose an aluminum radiator, preferably a combination of high-pressure cast aluminum modules. This type of radiator is integrally die-cast, so there is no problem of weld leakage. And its biggest advantage is that the product is not limited by the residential heating system, and even in an open boiler system, it can not be corroded by oxygen. Due to the modular design, if the indoor temperature is not enough after a heating season, one or two additional pieces can be installed the next year to meet their needs, without the need to replace the entire set of heating like a steel radiator.
With the continuous development of electronic heat sinks, the classification of electronic heat sinks is no longer limited to these three modes. Let's continue to introduce it below!
4. Pure copper radiator
The thermal conductivity of copper is 1.69 times that of aluminum, so under the same conditions, pure copper radiators can quickly remove heat from the heat source. However, the quality of copper is an issue, and many of the advertised "pure copper radiators" are not actually 100% copper. In the list of copper, copper with a copper content exceeding 99% is called acid-free copper, and the next grade of copper is Dan copper with a copper content below 85%. At present, the copper content of most pure copper radiators in the market is between the two. Some low-quality pure copper radiators have a copper content of even less than 85%. Although the cost is very low, their thermal conductivity is greatly reduced, which affects heat dissipation. In addition, copper also has obvious drawbacks, such as high cost, difficult processing, and high quality of heat sinks, which hinder the application of all copper heat sinks. The hardness of red copper is not as good as that of aluminum alloy AL6063, and some mechanical processing properties (such as grooving) are not as good as aluminum; The melting point of copper is much higher than that of aluminum, which is not conducive to extrusion forming and other issues.
5. Ceramic heat sink (also known as ceramic heat exchanger)
The production process of ceramic radiators is basically the same as that of kiln furniture, and thermal conductivity and oxidation resistance are the main application properties of materials. Its principle is to place the ceramic radiator near the flue outlet and at a higher temperature, without the need for cold air or high temperature protection. When the kiln temperature is 1250-1450 ℃, the temperature at the flue outlet should be 1000-1300 ℃. The ceramic heat exchanger can recover waste heat up to 450-750 ℃, and the recovered hot air is sent into the kiln and gas to form a mixture for combustion, which directly reduces production costs and increases economic benefits.
Ceramic heat exchangers have developed well due to the limitations of metal heat exchangers, as they effectively solve problems such as corrosion resistance and high temperature resistance, making them the best heat exchanger for recovering high-temperature waste heat. After years of production practice, it has been shown that the ceramic heat exchanger has good performance. Its main advantages are: good thermal conductivity, high high-temperature strength, good oxidation resistance, and thermal shock resistance. Long service life, minimal maintenance, reliable and stable performance, and easy operation. It is currently the best device for recovering waste heat from high-temperature flue gas.
6. Copper aluminum combined radiator
The combination of these two metals is relatively difficult, and the affinity between copper and aluminum is poor. If the bonding treatment is not good, it will generate a large interfacial thermal resistance (i.e., the thermal resistance between the two metals due to insufficient contact). In actual design and manufacturing, manufacturers always try to reduce interface thermal resistance as much as possible, leveraging strengths and avoiding weaknesses, which often reflects their design capabilities and manufacturing processes
According to the material, electronic heat sinks can be divided into so many types. I believe that in the future, there will be more and more types of them, which will better meet our more requirements
Related News
The processing process of profile radiator
Many people are curious about the forming process of profile radiators, and they are curious about what kind of processing can make them look like this. It is very delicate, and today we will reveal the secret for you!
Learn moreEvaluation of the Quality of Electronic Radiators
An electronic heat sink is a device that accelerates the heat dissipation of a heating element. There are two ways to measure the quality of a heat sink: heat dissipation and silence. The function of an electronic heat sink is to absorb this heat and then dissipate it into or out of the chassis, ensuring that the temperature of computer components is normal.
Learn moreRequirements for water quality of electronic radiators
We know that the durability of electronic radiators involves multiple factors, and the main factors that determine their service life are: water quality standards, standardized operation, correct selection, and qualified products. After multiple experiments, it was found that electronic radiators have higher water quality requirements than other radiators.
Learn moreReasons for choosing profile radiators
Profile radiators have been widely used in today's society and are favored by more and more people. So, what are its functions that can gain so many hearts? Let's decrypt it now!
Learn more